| |
ST1601
Standard model hermetic sand blasting cabinet
Features :
1. This unit is a machining tool designed for typical finishing
operation ( not mass finishing ). Ease of operation, excellent
hermetic seal, no pollution.
2. Main applications: Rust removal of molds, deburring, etching,
matte finishing treatment, etc.
3. Application abrasives: Aluminum oxide, emery, glass beads,
plastic grains, etc.
Size of portal for
working object:
|
|
Item |
Type
1601 |
| Space
occupied m/m |
750x1000x1800 |
| Working
Area m/m |
700x600x700 |
| Nozzle
m/m |
6-8m/m |
| Dust
gathering motor |
1/2
HP |
| Dust
gathering tube |
4
sticks |
|
|
| |
ST1602
Cyclone type hermetic sand blasting cabinet
Features :
1. The cyclone barrel is designed to site behind the cabinet
in order to lessen the space occupation. The cyclone barrel
is applied an adjustable design where #26~#300 abrasives
are workable. Ease of operation, excellent hermetic seal,
no pollution, no loss for workable abrasives.
2. Main applications : Rust removal of mold, deburring,
etching, matte finishing treatment, etc.
3. Applicable abrasives : #26~#300 aluminum oxide, emery,
glass beads. Plastic grains, etc.
Size of portal
for working object:
|
|
Item |
Type
1602 |
| Space
occupied m/m |
950x1200x1850 |
| Working
Area m/m |
900x800x750 |
| Cyclone
barrel m/m |
400øx650L |
| Nozzle
m/m |
6-8m/m |
| Dust
gathering motor |
1
HP |
| Dust
gathering tube |
6
sticks |
|
|
|
| |
ST1603
Gravitational cyclone model sand blasting cabinet
Features :
1. The cyclone barrel is designed to site on the top of the cabinet.
Because of the principle of gravity caused by the abrasives themselves,
the finishing efficiency is increased higher than those sand blasting
cabinet that traditionally site its abrasives accumulation barrel
at lower part of cabinet. The cyclone barrel is applied an adjustable
design where #26~#300 abrasives are workable. Ease of operation,
excellent hermetic seal, no pollution, no loss for workable abrasives.
2. Main application : Rust removal of molds, deburring, etching,
matte finishing treatment, etc.
3. Applicable abrasives : #26~#300 aluminum oxide, emery, glass
beads, plastic grains, etc.
Size
of portal for working object:
|
|
Item |
Type
1603 |
| Space
occupied m/m |
950x1200x2300 |
| Working
Area m/m |
900x800x750 |
| Cyclone
barrel m/m |
400øx650L |
| Nozzle
m/m |
6-8m/m |
| Dust
gathering motor |
1
HP |
| Dust
gathering tube |
8
sticks |
|
|
| |
ST1604
Airtight blasting cabinet
Features :
1. This cabinet is additionally equiped with a pallet and a rotary
disc. The pallet can move around where depends on the trasportation
requirement of workpiece to be finished. If sand blasting operation
is desired, just place the workpieces on the rotary disc of pallet
and then push the rotary disc of pallet into cabinet ot proceed
the sand blasting poeration accordingly. The cyclone barrel is
applied an adjustable desigh where #26-#300 abrasives are workable.
2. Main applications : This cabinet is suitable for heavy workpieces
to proceed sand blasting operation, such as molds, workpieces
for heat treatment, etc.
3. Applicable abrasives : #26-#300 aluminum oxide, emery, glass
beads, plastic grains, etc.
Size
of portal for working object:
|
|
Item |
Type
1604 |
| Space
occupied m/m |
950x1200x2300 |
| Working
Area m/m |
900x800x750 |
| Cyclone
barrel m/m |
400øx650L |
| Cart
turntable m/m |
55ø |
| Nozzle
m/m |
6-8m/m |
| Dust
gathering motor |
1
HP |
| Dust
gathering tube |
8
sticks |
|
|
|
